Description

Brass battery terminals, car battery terminals up to 12V

• The terminals are made of brass, so they conduct electricity well and are not subject to corrosion.
• The set contains two parts: for the negative pole and for the positive pole.
• These terminals are standardly installed in most motor vehicles.
• Before installing or replacing the terminal, thoroughly clean the battery terminal to ensure good contact and proper charging to prevent losses.

Specification:

• Brass clamps (up to 600A) are designed for all types of 6-12-24V batteries.
• Connection or disconnection is done without the use of tools.
• For use in cars, vans, trucks and buses.
• Price for a set: 2 pieces

Instructions for use:

1. Remove the old clips from the power cable.
2. Clean the cables thoroughly to ensure the best possible connection.
3. Loosen the clamping screws on the clamps.
4. Insert the cables into the clamps, then tighten both screws evenly clamps to hold the cables firmly and not move.
5. Attach the clamps to the car battery and tighten the screws firmly.

CAUTION:

Do not insert the clamps when installing them on the car battery to avoid damaging the battery.